Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010 Configuration Manual page 738

For e series broadband services routers - link layer configuration
Table of Contents

Advertisement

JUNOSe 11.1.x Link Layer Configuration Guide
706
Monitoring Dynamic Interfaces and Profiles
ATM1483 PVC OAM Loopback frequency Number of seconds between
transmissions of OAM F5 end-to-end loopback cells on a circuit created with
this profile
ATM1483 Ip Subscriber information Subscriber login information for the
specified dynamic interface type
ATM1483 Profile Name of the profile assigned to the specified
upper-interface encapsulation type (bridged Ethernet, IP, PPP, or PPPoE);
these profiles are referenced in the base profile for a dynamic ATM 1483
subinterface as nested profile assignments
ATM Virtual Circuit Class Name of the ATM VC class assigned to the
bulk-configured VC ranges associated with this base profile, if configured
VLAN Auto-configure Whether autodetection of the specified upper-interface
encapsulation type (IP or PPPoE) is enabled or disabled for a dynamic VLAN
subinterface
VLAN Agent Circuit Identifier
subinterface uses the agent-circuit-identifier information in the option 82
field of DHCP messages or in the DSL Forum VSA 26-1 of PPPoE PADR and
PADI packets: enabled or disabled
VLAN Advisory Rx Speed Configured advisory receive speed, in Kbps, for
the dynamic VLAN subinterface; the E Series LAC sends this value to the
LNS in the RX Connect-Speed AVP [38]
VLAN Advisory Tx Speed Configured advisory speed, in Kbps, for the
dynamic VLAN subinterface.
VLAN Description Text description assigned to VLAN subinterfaces that
are created with this profile
VLAN Profile Name of the profile assigned to the specified upper-interface
encapsulation type (IP or PPPoE); these profiles are referenced in the base
profile for a dynamic VLAN subinterface as nested profile assignments
VLAN Service Profile Service profile name for a VLAN
VLAN Svlan Ethertype Ethertype that the packet must use this to create
the dynamic VLAN subinterface
Bridged Ethernet Mtu MTU size configured for a dynamic bridged Ethernet
interface
Bridged Ethernet Service Profile Name of the IP service profile associated
with the interface profile for this dynamic bridged Ethernet interface
Example 1 Displays configuration information for a profile assigned to a
dynamic interface
host1#show profile name pppoeProfile
Profile
Unnumbered interface on
Router
Directed Broadcast
Whether autodetection of the VLAN
: pppoeProfile
: loopback 1
: default
: Disabled

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junose 11.1.x

Table of Contents