Table 47: Show Qos Interface-Hierarchy Output Fields; Monitoring The Qos Profiles Attached To An Interface - Juniper JUNOSE 11.1.X - QUALITY OF SERVICE CONFIGURATION GUIDE 3-21-2010 Configuration Manual

Monitoring the QoS Profiles Attached to an Interface

Display the QoS profiles in effect for and stacked above the specified interface. If no
Purpose
QoS profiles are attached to the interface or above the interface, the router displays
the QoS profile that is in effect down the interface stack toward the port interface.
To display the interface hierarchy for a specific interface:
Action
host1#show qos interface-hierarchy interface atm 11/0.1
attachment@ atm-vc ATM11/0.1:
--------------- ------- --------- ----- ----------- ------------ -------
qp2@ATM11/0.1
qp2@ATM11/0.1
qp2@ATM11/0.1
qp2@ATM11/0.1
qp2@ATM11/0.1
qp2@ATM11/0.1
qp2@ATM11/0.1
qp2@ATM11/0.1
qp2@ATM11/0.1
qp2@ATM11/0.1
qp2@ATM11/0.1
qp2@ATM11/0.1
qp2@ATM11/0.1
To display the interface hierarchy using an L2TP session:
host1#show qos interface-hierarchy l2tp-session session1
To display the interface hierarchy for a tunnel interface, specify the interface at the
root of the scheduler hierarchy located on the tunnel-service interface or at the same
hierarchy for LNS GRE tunnel traffic:
host1#show qos interface-hierarchy tunnel-server 6/0
To display the interface hierarchy for an interface set:
host1#show qos interface-hierarchy qos-interface-set gigEbusiness
To display the interface hierarchy for an interface superset:
host1#show qos interface-hierarchy qos-interface-superset allservices
Table 47 on page 339 lists the show qos interface-hierarchy command output fields.
Meaning

Table 47: show qos interface-hierarchy Output Fields

t-class interface rule
qos profile group
atm-vc
atm-vp
atm-vc
atm-vc
atm-vc
g1 atm
g1 atm-vc
g1 atm-vp
g1 atm-vc
g1 atm-vc
g2 atm-vp
g2 atm-vc
g2 atm-vc
Field Name
attachment@
qos profile
Chapter 31: Monitoring QoS on E Series Routers
traffic
type type class
node
node
queue best-effort default
queue tc5
queue tc6
group
node
node
queue tc1
queue tc2
node
queue tc3
queue tc4
Field Description
Interface for which the hierarchy is being displayed
Name of the QoS profile and its attachment point
Monitoring the QoS Profiles Attached to an Interface
scheduler queue
profile profile
default default
default default
default
default default
default default
strictShaper default
default default
default default
default default
default default
default default
default default
default default
339