Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010 Configuration Manual page 736

For e series broadband services routers - link layer configuration
Table of Contents

Advertisement

JUNOSe 11.1.x Link Layer Configuration Guide
704
Monitoring Dynamic Interfaces and Profiles
Output policy Name of output policy and whether statistics are enabled or
disabled
PPP Keepalive PPP keepalive period, in seconds
PPP Magic Number Enabled or disabled
PPP Peer DNS Priority Enabled or disabled
PPP Peer WINS Priority Enabled or disabled
PPP Authentication Type of authentication configured: PAP, CHAP, or none
PPP Authentication Router Name of authentication virtual router
PPP Negotiate MRU MRU configured for the profile
PPP Packet Log Enabled or disabled
PPP State Log Enabled or disabled
PPP Chap Challenge Length Minimum and maximum Chap Challenge
length
PPP Passive Mode Enabled or disabled
PPP Multilink Enabled or disabled
PPP IPCP netmask option Enabled or disabled
PPP AAA Profile AAA profile associated with this PPP interface
PPP Multilink Fragmentation Enabled or disabled
PPP Multilink Fragment Size Multilink fragment size for this PPP interface
PPP Multilink Reassembly Enabled or disabled
PPP Multilink Mrru Multilink MRRU value for this PPP interface
PPP Initiate IP Initiation of IPv4 over this PPP interface; enabled or disabled
PPP Initiate IPv6 Initiation of IPv6 over this PPP interface; enabled or
disabled
PPPoE Max Sessions Maximum number of PPPoE subinterfaces that can
be on an interface
PPPoE Always-offer Router offers to set up a session for the client, even if
the router has insufficient resources to establish a session; enabled or disabled
PPPoE Remote-Circuit-Id Router captures and processes a vendor-specific
tag containing a remote circuit ID transmitted from a digital subscriber line
access multiplexer (DSLAM); enabled or disabled
PPPoE Log PPPoeControlPacket Enabled or disabled
PPPoE duplicate-protect Enabled or disabled

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junose 11.1.x

Table of Contents