Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010 Configuration Manual page 646

JUNOSe 11.1.x Link Layer Configuration Guide
614
Monitoring Upper-Layer Dynamic Interfaces and Profiles
IPv6 Router Router name or default
IPv6 Src-Addr Validation Source-Address Validation; enabled or disabled
IPv6 Administrative MTU MTU size
IPv6 ND Enabled State of the Neighbor Discovery; enabled or disabled
IPv6 ND ManagedConfig State of the Neighbor Discovery router
advertisement managed flag; enabled or disabled
IPv6 ND OtherConfig State of the Neighbor Discovery router advertisement
other config flag; enabled or disabled
IPv6 ND SuppressRa Status IPv6 router advertisement suppression; enabled
or disabled
IPv6 ND RaInterval Interval (in seconds) of the Neighbor Discovery router
advertisement
IPv6 ND RaLifeTime Lifetime (in seconds) of the Neighbor Discovery router
advertisement
IPv6 ND ReachableTime Amount of time (in milliseconds) that the neighbor
is expected to remain reachable
IPv6 ND RaPrefix Configured prefixes for Neighbor Discovery router
advertisement
IPv6 ND ValidLifetime Amount of time (in seconds) that the router advertises
the IPv6 prefix as valid
IPv6 ND PreferredLifetime Amount of time (in seconds) that the router
advertises the specified IPv6 prefix as preferred
IPv6 ND PrefixOnLink State of the on-link flag; enabled or disabled
IPv6 ND PrefixAutoConfig State of the use the specified prefix for IPv6
autoconfiguration; enabled or disabled
Example 1 Displays configuration information for a profile assigned to a
dynamic interface
host1#show profile name pppoe
PPP Keepalive
PPP Magic Number
PPP Magic Number Mismatch
PPP Peer DNS Priority
PPP Peer WINS Priority
PPP Authentication
PPP Authentication Router
PPP Negotiate MRU
PPP Packet Log
PPP State Log
PPP Chap Challenge Length
PPP Passive Mode
PPP Multilink
PPP IPCP Netmask Option
PPP IPCP Lockout Option
: 30
: enabled
:reject
: disabled
: disabled
:
:
: (use lower layer MRU)
: disabled
: disabled
: 16 - 32
: disabled
: disabled
: disabled
: disabled