Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010 Configuration Manual page 137

show atm vp-tunnel
show mpls cross-connects atm
Description Text description configured for the VP
Example 1 Displays all VP descriptions configured on the router
host1#show atm vp-description
Interface VPI Description
ATM 2/0 0 atm20Vpi0Subscribers
ATM 2/0 1 atm20Vpi1Subscribers
ATM 2/1 0 atm21Vpi0Subscribers
Example 2 Displays all VP descriptions for the specified ATM interface
host1#show atm vp-description atm 2/0
Interface VPI Description
ATM 2/0 0 atm20Vpi0Subscribers
ATM 2/0 1 atm20Vpi1Subscribers
Example 3 Displays the VP description for the specified VPI
host1#show atm vp-description atm 2/0 1
Interface VPI Description
ATM 2/0 1 atm20Vpi1Subscribers
See show atm vp-description.
Use to display a summary of all configured ATM virtual path tunnels.
Field descriptions
Intfc Interface number
VPI Virtual path identifier
Type VP tunnel traffic management type
Kbps Rate, in Kbps
Description Text description for the VP, if configured
Example
host1#show atm vp-tunnel 9/1
Intfc VPI Type Kbps
ATM 9/1 2 Cbr 4096
See show atm vp-tunnel.
Use to display all ATM cross-connects (passthrough connections between local
subinterfaces).
See section Monitoring ATM Cross-Connects for Layer 2 Services over MPLS in
JUNOSe BGP and MPLS Configuration Guide for information about using the show
mpls cross-connects atm command.
See show mpls cross-connects atm.
Chapter 1: Configuring ATM
Description
atm91Vpi2Subscribers
Monitoring ATM
105