Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010 Configuration Manual page 531

show bridge table
Port Bridge group port number on which this interface resides
Interface Interface type and specifier associated with the port (for
example, ATM3/3.1)
Status Operational status of the physical interface: Up, Down,
LowerLayerDown, NotPresent
Example 1 Displays configuration, statistics, and status information for all ports
currently associated with the bridge group
host1#show bridge westford01 port 1
ATM3/3.1
Port Number: 1
Operational Status: LowerLayerDown
Admin Status: Up
Snmp Link Status Trap: Disabled
Max Learn: Unlimited
Subscriber Policy: default Subscriber
Statistics:
In Octets:
In Frames:
In Discards:
In Errors:
Out Octets:
Out Frames:
Out Discards: 0
Out Errors:
queue 0: traffic class best-effort, bound to bridge
Queue length 0 Bytes
Forwarded packets 0, Bytes 0
Dropped committed packets 0, Bytes 0
Dropped conformed packets 0, Bytes 0
Dropped exceeded packets 0, Bytes 0
Example 2 Uses the brief keyword to display summary information for each
port
host1#show bridge westford01 port brief
Port Interface
------ -------------------------
1 ATM3/3.1
See show bridge port.
Use to display information about dynamic and static entries in the MAC address
table for the specified bridge group.
To display only static address entries, use the static keyword.
To display only dynamic address entries, use the dynamic keyword.
Field descriptions
Chapter 15: Configuring Transparent Bridging
0
0
0
0
0
0
0
Status
------------
LowerLayerDown
Monitoring Transparent Bridging
ATM3/3.1
499