Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010 Configuration Manual page 319

You can use the output filtering feature of the show command to include or exclude
lines of output based on a text string that you specify. Refer to the show Commands
in JUNOSe System Basics Configuration Guide, for details.
NOTE: The E120 and E320 routers output for monitor and show commands is
identical to output from other E Series routers, except that the E120 and E320 routers
output also includes information about the adapter identifier in the interface specifier
(slot/adapter/port).
baseline ppp interface
show ppp interface
Use to establish a baseline for PPP statistics on an interface.
The router implements the baseline by reading and storing the statistics at the
time the baseline is set, then subtracting this baseline whenever baseline-related
statistics are retrieved.
Use the optional delta keyword with PPP show commands to show baselined
statistics.
Examples
host1#baseline ppp interface atm 3/3.20
host1#baseline ppp interface atm 3/0/3.20
There is no no version.
See baseline ppp interface.
Use to display selective PPP interface information.
You can filter the command display for characteristics of particular interest, such
as interface type, data type, configured protocol, or interface state.
Field descriptions
inactivity-timeout Inactivity timeout, in seconds; session is terminated if
it is not active for specified timeout
monitor-ingress-only Indicates whether the router monitors only ingress
traffic for the configured idle (inactivity) timeout period; true (router monitors
only ingress traffic) or false (router monitors both ingress traffic and egress
traffic)
PPP interface Interface type, interface specifier, and status (up, down,
lowerDown, not present, passive, or tunnel). For more information about
specifying the physical interface on which you want to configure PPP, see
Interface Types and Specifiers in JUNOSe Command Reference Guide.
accounting-timeout Accounting timeout in seconds; frequency of accounting
updates to the authentication server
Interface alias Alias or description of the PPP interface
Chapter 8: Configuring Point-to-Point Protocol
Monitoring PPP Interfaces
287