Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010 Configuration Manual page 733

show pppoe interface lockout-time
Chapter 18: Configuring Dynamic Interfaces Using Bulk Configuration
Use to display summary information about the encapsulation type lockout
parameters configured for PPPoE clients on a dynamic PPPoE subinterface
column.
The following field descriptions and example include only the portion of the
show pppoe interface command display relevant to lockout configuration for
PPPoE clients. For more information about using this command, see "show
pppoe interface" on page 421 in "Configuring Point-to-Point Protocol over
Ethernet" on page 375.
Field descriptions
Lockout Configuration (seconds) Encapsulation type lockout settings for
the PPPoE client associated with the dynamic PPPoE subinterface column
Min Minimum lockout time, in seconds
Max Maximum lockout time, in seconds
Total clients in active lockouts Number of PPPoE clients currently
undergoing dynamic encapsulation type lockout
Total clients in lockout grace period Number of PPPoE clients currently
in a lockout grace period; for more information about the lockout grace
period, see "Guidelines for Configuring Encapsulation Type Lockout" on
page 527 in "Configuring Dynamic Interfaces" on page 515.
Example
host1#show pppoe interface atm 3/0.101
. . .
Lockout Configuration (seconds): Min 5, Max 60
Total clients in active lockouts: 0
Total clients in lockout grace period: 0
See show pppoe interface.
Use to display detailed information about the current encapsulation type lockout
condition for each PPPoE client associated with a dynamic PPPoE subinterface
column on a static PPPoE major interface.
Field descriptions
PPPoE interface Specifier for the PPPoE interface
Lockout Configuration (seconds) Encapsulation type lockout settings for
the PPPoE client associated with the dynamic PPPoE subinterface column
Min Minimum lockout time, in seconds
Max Maximum lockout time, in seconds
Total clients in active lockouts Number of PPPoE clients currently
undergoing dynamic encapsulation type lockout
Total clients in lockout grace period Number of PPPoE clients currently
in a lockout grace period; for more information about the lockout grace
Monitoring Dynamic Interfaces and Profiles
701