Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010 Configuration Manual page 732

JUNOSe 11.1.x Link Layer Configuration Guide
show columns
show pppoe interface
700
Monitoring Dynamic Interfaces and Profiles
ATM 3/0.8100 1 8100 8100 PVC
8000 circuit(s) found
Reserved VCC ranges:
Start Start End End
Interface VPI VCI
--------- ----- ----- --- ---
ATM 2/0 2 100
ATM 2/0 3 300
2 reservation(s) found
Example 2 Displays all reserved VC ranges on the router
host1#show atm vc reserved
Reserved VCC ranges:
Start Start End End
Interface VPI VCI
--------- ----- ----- --- ---
ATM 2/0 2 100
ATM 2/0 3 300
2 reservation(s) found
See show atm vc.
Use to display static and dynamic interface counts for each interface column.
Counts for PPP and PPPoE interface columns are updated when the PPP layer
comes up.
Counts for bridged Ethernet and IP over ATM columns are updated when the
ATM layer comes up.
Field descriptions
Type Interface type
Total Total number of interfaces on this column
Static Number of static interfaces on this column
Dynamic Number of dynamic interfaces on this column
Example
host#show columns
Interface columns:
------------------
Type
-------------------- ---------- ---------- ----------
Bridged Ethernet
IP over ATM
PPP
PPPoE
See show columns.
SNAP UBR
VPI VCI
2 102
3 303
VPI VCI
2 102
3 303
Total Static Dynamic
4 2
4 2
22 12
10 5
0 0 0 DOWN
2
2
10
5