Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010 Configuration Manual page 528

JUNOSe 11.1.x Link Layer Configuration Guide
show bridge groups
496
Monitoring Transparent Bridging
Learning:
Max Learn:
Link Status Snmp Traps: Disabled
Subscriber Policy:
Protocol Actions:
Route IP
Route PPPoE
Port Count:
Interface Count:
Address Table:
Address Action
-------------- ----------
1011.22b2.333c forward
1234.abcd.5678 discard
Interfaces:
ATM3/3.1
Port Number: 1
Operational Status: LowerLayerDown
Admin Status: Up
Snmp Link Status Trap: Disabled
Max Learn: Unlimited
Subscriber Policy: default Subscriber
Statistics:
In Octets:
In Frames:
In Discards:
In Errors:
Out Octets:
Out Frames:
Out Discards: 0
Out Errors:
queue 0: traffic class best-effort, bound to bridge
Queue length 0 Bytes
Forwarded packets 0, Bytes 0
Dropped committed packets 0, Bytes 0
Dropped conformed packets 0, Bytes 0
Dropped exceeded packets 0, Bytes 0
See show bridge.
Use to display configuration information for all bridge groups currently configured
on your router.
To display the configuration settings for all bridge groups on your router, use the
details keyword.
Field descriptions
BridgeGroup Name assigned to the bridge group
Bridge Mode Bridging capability currently enabled, either concurrent routing
and bridging (CRB) or default bridging
Aging Time Length of time, in seconds, that a MAC address entry can
remain in the forwarding table
Enabled
Unlimited
default Subscriber
1
1
Interface
-------------------
ATM3/3.1
---
0
0
0
0
0
0
0
Age
-----
---
---
ATM3/3.1