Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010 Configuration Manual page 177

Frame relay DTE interface mlframe-relay Name of the MLFR bundle
N391 Value of the N391 full-status polling counter
N392 Value of the N392 error threshold counter
N393 Value of the N393 monitored events counter
T391 Value of the T391 link integrity polling timer interval
Configured LMI type One of the following options:
ANSI ANSI T1.617 Annex D
Q933A ITU-T Q.933 Annex A
Cisco Original Group of Four specification developed by DEC, Northern
Telecom, Stratacom, and Cisco
None Suppresses LMI
status is up Availability of the MLFR bundle: up or down
Number of interface down transitions Number of times the interface has
become unavailable
Time since last status change elapsed time since LMI information changed
Enquiries sent—Total number of LMI status inquiries sent by the DTE
on this interface
Full enquiries sent Total number of LMI full status inquiries sent by the
DTE on this interface
Enquiry responses received—Total number of LMI full and regular status
responses received by the DTE on this interface
Full enquiry responses received—Total number of LMI full status
responses received by the DTE on this interface
Async updates received Total number of asynchronous LMI updates
received by the DTE on this interface
Unknown messages received Total number of unknown LMI messages
received on this interface
Loss of sequencing detected Total number of times a loss of sequencing
in received LMI messages was detected by the DTE on this interface
No response timeouts Total number of times a timeout occurred without
receiving a response to an LMI request by the DTE on this interface
Last sequence number sent Last sequence number sent on this interface
Last sequence number received Last sequence number received on
this interface
DCE field descriptions:
Chapter 3: Configuring Multilink Frame Relay
Monitoring MLFR
145