Table of Contents
Advertisement
Chapter 6: Configuring 802.3ad Link Aggregation and Link Redundancy
LACP state
active Actor link actively particulates in LACP
passive Actor link transmits LACP PDUs
timeout Timeout control value; this value is not configurable and is set
to long timeout (30 seconds)
aggregatable Actor link can be aggregated
individual Actor link cannot be aggregated; must operate as an
individual link
in-sync Actor link has joined the correct LAG bundle
out-of-sync Actor link is unable to join the correct LAG bundle
collecting Actor link is actively collecting incoming frames; if this field
does not appear, the Actor link is not actively collecting incoming frames
distributing Actor link is actively distributing outgoing frames; if this
field does not appear, the Actor link is not actively distributing outgoing
frames
defaulted Actor link is using defaulted operational information about
the Partner link that was administratively configured for Partner; if this
field does not appear, the operational information about the Partner link
has been received by the Actor link in an LACP PDU
expired Actor link's receive machine is expired; if this field does not
appear, the Actor link's receive machine is active
port Port number assigned to the Ethernet link by the Actor link
priority Priority assigned to this Ethernet link by the Actor link
Key Operational key value assigned to the Ethernet link by the Actor link
System Priority Priority assigned to the Ethernet link by the system
System MAC Address MAC address assigned to the Actor link
Partner Status of the Partner link
active
Partner link participates in the LACP
passive Partner link transmits LACP PDUs
timeout Timeout control value; short timeout or long timeout
aggregatable Partner link can be aggregated
individual Partner link cannot be aggregated
in-sync Partner link has joined the correct LAG bundle
out-of-sync Partner link has joined the incorrect LAG bundle
Monitoring 802.3ad Link Aggregation
223
Advertisement
Table of Contents
Troubleshooting
