Monitoring Multiclass Mlppp - Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010 Configuration Manual

For e series broadband services routers - link layer configuration
Table of Contents

Advertisement

JUNOSe 11.1.x Link Layer Configuration Guide
Related Topics

Monitoring Multiclass MLPPP

Display information about the status and configuration of multilink classes on an
Purpose
MLPPP Interface.
To display configuration information about multiclass MLPPP member links configured
Action
in the specified MLPPP bundle:
host1#show ppp interface mlppp bundle1 config
PPP interface mlppp mlppp1 is up
...
PPP multilink member-interface gigabitEthernet 3/0.1.1 is up
Link interface administrative status is open
PPP multilink multiclass is enabled
PPP multilink multiclass classes 4
PPP multilink multiclass fragmentation is enabled on "voice", otherData"
PPP multilink multiclass reassembly is enabled on "voice", "otherData"
...
PPP multilink member-interface gigabitEthernet 3/0.1.2 is up
Link interface administrative status is open
PPP multilink multiclass is enabled
PPP multilink multiclass classes 4
PPP multilink multiclass fragmentation is enabled on "voice","otherData"
PPP multilink multiclass reassembly is enabled on "voice", "otherData"
...
1 mlppp interfaces found
To display the statistics of the multiclass MLPPP member links configured in the
specified MLPPP bundle:
host1#show ppp interface mlppp bundle1 statistics
PPP interface mlppp bundle1 is up
Time since last baseline 2 days, 18 hours
2 receive classes, 2 transmit classes
Interface statistics
Receive Class 0:
0 fragments in reassembly list
0 reordered, 0/0 discarded fragments/bytes,
0x0 last received sequence number
Receive Class 1:
0 fragments in reassembly list
0 reordered, 0/0 discarded fragments/bytes,
0x0 last received sequence number
Transmit Class 0:
358
Monitoring Multiclass MLPPP
Configuring Multiclass MLPPP on page 352
packets
octets
errors
discards
fragments
in
out
0
0
0
0
0
0
0
0
0
0

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010 and is the answer not in the manual?

This manual is also suitable for:

Junose 11.1.x

Table of Contents