Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010 Configuration Manual page 112

JUNOSe 11.1.x Link Layer Configuration Guide
show atm map
show atm oam
80
Monitoring ATM
ATM 4/0 up
ATM 6/0 lowerLayerDown
See show atm interface.
See show interfaces.
Use to display the list of all configured ATM static maps to remote hosts on an
ATM network.
Field descriptions
Map list Name of map list and method used to enter the map list.
PERMANENT indicates that the map entry was configured; it was not entered
automatically by a process.
protocol address maps to VCx—Name of protocol, the protocol address, and
the VCD that the address is mapped to (for ATM VCs configured with the
atm pvc command).
VC Number of the virtual circuit
broadcast Indicates pseudo-broadcasting
connection up Indicates a point-to-point virtual circuit
Example 1
host1#show atm map
Map list my-map : PERMANENT
ip 192.168.2.10 maps to VC 10 atm 2/0
ip 192.168.2.20 maps to VC 11 atm 2/0
ip 192.168.2.30 maps to VC 12 atm 2/0
Map list other-map : PERMANENT
ip 192.10.2.10 maps to VC 100 atm 2/1
ip 192.10.2.20 maps to VC 101 atm 2/1
ip 192.10.2.30 maps to VC 102 atm 2/1
Example 2
host1#show atm map brief
Map list my-map : PERMANENT
Map list other-map : PERMANENT
Example 3
host1#show atm map my-map
Map list my-map : PERMANENT
ip 192.168.2.10 maps to VC 10 atm 2/0
ip 192.168.2.20 maps to VC 11 atm 2/0
ip 192.168.2.30 maps to VC 12 atm 2/0
See show atm map.
2
2
broadcast
broadcast
broadcast