Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010 Configuration Manual page 393

Table 17: show ppp interface mlppp Output Fields (continued)
Field Name
LCP negotiated options
Configuring Multiclass MLPPP on page 352
Related Topics
show ppp interface
Chapter 10: Configuring Multiclass Multilink PPP
Field Description
Negotiated LCP options for the local and peer
systems:
max-receive-unit Negotiated maximum receive
unit, in octets, for the local and remote (peer)
side of the link
max-receive-reconstructed-unit Negotiated
maximum receive reconstructed unit, in octets,
for the local and remote (peer) side of the link
authentication Negotiated authentication
method (none, pap, or chap) for the local and
remote (peer) side of the link
magic-number Negotiated magic number for
the local and remote (peer) side of the link
pfc Negotiated protocol field compression
(none or enabled) for the local and remote (peer)
side of the link
acfc Negotiated address and control field
compression (none or enabled) for the local and
remote (peer) side of the link
multiclass-classes Number of multilink classes
negotiated
multiclass-sequence-format Format of the
negotiated sequence number: long or short
Monitoring Multiclass MLPPP
361