Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010 Configuration Manual page 454

JUNOSe 11.1.x Link Layer Configuration Guide
422
Monitoring PPPoE
PADR received/PADR transmitted Number of request control packets
received/transmitted
PADS received/PADS transmitted Number of session confirmation
control packets received/transmitted
PADT received/PADT transmitted Number of termination control
packets received/transmitted
PADM received/PADM transmitted Number of message control packets
received/transmitted
PADN received/PADN transmitted Number of network control packets
received/transmitted
PAD packets received Total number of control packets received on the
interface
PAD packets transmitted Total number of control packets transmitted on
the interface
Invalid PAD Packets
Invalid Version Number of control packets received with an invalid
version
Invalid PAD Code Number of control packets received with an invalid
code
Invalid PAD Tags Number of control packets received with invalid tags
Invalid PAD Tag length Number of control packets received with an
invalid tag length
Invalid PAD Type Number of control packets received with an invalid
type
Invalid PADI Session Number of invalid PPPoE Active Discovery
Initiation sessions
Invalid PADR Session Number of invalid PPPoE Active Discovery
Request sessions
Invalid PAD packet length Number of control packets received with
an invalid packet length
Invalid PAD packets Number of invalid control packets received
Total Invalid PAD packets Total number of invalid control packets received
on the interface
Insufficient Resources Number of requests denied because of an inadequate
number of sessions; check the number of active clients
Lockout Configuration (seconds) Encapsulation type lockout settings for
the PPPoE client associated with the dynamic PPPoE subinterface column;
for more information about these fields, see "Configuring Encapsulation