Table of Contents
Advertisement
Enabling PPPoE Service Name Tables for Use with Static Interfaces
To enable a PPPoE service name table for use with a static interface, assign the
service name table to the PPPoE major interface.
PPPoE over ATM Configurations
To enable a PPPoE service name table for use with a static interface in PPPoE over
ATM configurations:
1.
2.
3.
4.
5.
host1(config-pppoe-service-name-table)# service myQOSClass2 action drop
Example 3 – Includes an unknown service name entry in the PPPoE service
name table. The associated action for this service tag is terminate. Use the action
keyword with the service command to associate an action with the unknown
service name entry.
host1(config-pppoe-service-name-table)# service unknown-service-name action
terminate
Example 4 – Includes an empty service name entry in the PPPoE service name
table. The associated action for this service tag is drop. Use the action keyword
with the service command to associate an action with the empty service name
entry.
host1(config-pppoe-service-name-table)#service empty-service-name action drop
Use the no version to remove the custom service name tags from the PPPoE
service name table or restore the default action for the empty and unknown
service name tags.
See service.
Configure an ATM physical interface.
host1(config)#interface atm 3/0
Configure an ATM 1483 subinterface.
host1(config-if)#interface atm 3/0.1
Configure an ATM PVC by specifying the VCD, the VPI, the VCI, and the
encapsulation type.
host1(config-subif)#atm pvc 10 100 22 aal5snap
Select PPPoE as the encapsulation method on the interface. This command
creates the PPPoE major interface.
host1(config-subif)#encapsulation pppoe
Assign the PPPoE service name table to the PPPoE major interface.
host1(config-subif)#pppoe service-name-table myServiceTable1
Chapter 12: Configuring Point-to-Point Protocol over Ethernet
Configuring PPPoE Service Name Tables
407
Advertisement
Table of Contents
Troubleshooting
