Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010 Configuration Manual page 126

JUNOSe 11.1.x Link Layer Configuration Guide
94
Monitoring ATM
Use to display information about a specific VC.
To specify the circuit to display, do one of the following:
Enter the VCD.
Use the vpi-vci keyword and enter the VPI and VCI.
Enter the description configured for the ATM 1483 subinterface (with the
atm atm1483 description command) on which the VC resides.
Field descriptions
VCD Virtual circuit descriptor
VPI Virtual path identifier
VCI Virtual channel identifier
Encap Encapsulation method
Service Type Service type configured on the VC: UBR, UBR-PCR, NRT-VBR,
RT-VBR, CBR
Inverse ARP enable Whether or not Inverse ARP is enabled: yes, no
Assigned VC class Name of the VC class assigned to this VC, if configured
InPackets Number of packets received on this circuit
InBytes Number of bytes received on this circuit
InCells Number of ATM cells received on this circuit
OutPackets Number of packets transmitted on this circuit
OutBytes Number of bytes transmitted on this circuit
OutCells Number of ATM cells transmitted on this circuit
InErrors Number of errors received on this circuit
OutErrors Number of outgoing errors on this circuit
InPacketDiscards Number of incoming packets discarded on this circuit
InPacketUnknownProtocol Number of incoming packets with an unknown
protocol type
InByteDiscards Number of incoming bytes discarded on this circuit
CrcErrors Number of CRC errors detected on this circuit
SAR time-outs Number of segmentation and reassembly (SAR) timeouts
reached on this circuit
Over-sized SDUs Number of oversized service data units (SDUs) received
on this circuit
Alarm drop count Number of successive alarm cells that the router receives
before reporting that the PVC is down