Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010 Configuration Manual page 728

For e series broadband services routers - link layer configuration
Table of Contents

Advertisement

JUNOSe 11.1.x Link Layer Configuration Guide
696
Monitoring Dynamic Interfaces and Profiles
Auto configure status Setting of the autoconfiguration feature
dynamic Autodetection is on; the router automatically detects the next
upper interface
static Autodetection is off
Auto configure interface(s) Types of dynamic upper interfaces configured
with the auto-configure command: bridged Ethernet, IP, PPP, or PPPoE
Detected 1483 encapsulation If the encapsulation type is set to
aal5autoconfig, displays the 1483 encapsulation type detected on the
subinterface (displays AUTO until a packet is detected)
Detected dynamic interface Type of dynamic upper interface detected
during autoconfiguration: bridged Ethernet, IP, PPP, PPPoE, or (if no packet
has been received) none
Interface types in lockout Encapsulation types currently experiencing
lockout: bridged Ethernet, IP, PPP, PPPoE, or none
Lockout state (seconds) Settings of encapsulation type lockout for the
upper-layer encapsulation type indicated
Min Minimum lockout time, in seconds
Max Maximum lockout time, in seconds
Current Current lockout time, in seconds; displays 0 (zero) if lockout
is not occurring
Elapsed Time elapsed into the lockout time, in seconds; displays 0
(zero) if lockout is not occurring
Next Lockout time for the router to use for the next lockout event, in
seconds
Assigned profile For each dynamic interface type, indicates whether or not
a profile is assigned and, if assigned, displays the profile name
Subscriber info Subscriber login information for the specified dynamic
interface type (bridged Ethernet or IP)
SNMP trap link-status Trap link status: enabled or disabled
InPackets Number of packets received on this interface
InBytes Number of bytes received on this interface
OutPackets Number of packets transmitted on this interface
OutBytes Number of bytes transmitted on this interface
InErrors Number of errors received on this interface
OutErrors Number of outgoing errors on this interface
InPacketDiscards Number of incoming packets discarded on this interface

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junose 11.1.x

Table of Contents