Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010 Configuration Manual page 322

For e series broadband services routers - link layer configuration
Table of Contents

Advertisement

JUNOSe 11.1.x Link Layer Configuration Guide
NOTE: The command displays a value of "none" for any negotiated option parameters
if the option was not negotiated.
NOTE: The command displays a value of "none" for any negotiated option parameters
if the option was not negotiated.
290
Monitoring PPP Interfaces
operational-status OSINLCP operational status (up, down, not present,
or not present no resources)
terminate-reason Reason for termination of OSINLCP service
OSINLCP negotiated options
npdu-alignment Negotiated NPDU alignment for the local and remote
(peer) side of the link
MPLSNLCP protocol configuration
configured MPLSNLCP is configured on this interface (true or false)
administrative-status MPLSNLCP administrative status (open or closed)
MPLSNLCP protocol status
operational-status MPLSNLCP operational status (up, down, not present,
or not present no resources)
terminate-reason Reason for termination of MPLSNLCP service
MPLSNLCP negotiated options
npdu-alignment Negotiated NPDU alignment for the local and remote
(peer) side of the link
LCP protocol configuration
max-receive-unit Controls negotiation of the local MRU option; "use
lower layer" indicates that the MRU of the layer below PPP defines the
MRU to be negotiated; "disabled" indicates that the MRU option is not
to be negotiated. A numeric value indicates the MRU value to be
negotiated
authentication Controls the negotiation of the local authentication
option; "none" indicates do not negotiate; "chap" indicates negotiate
chap; "pap" indicates negotiate pap; "chap/pap" indicates negotiate chap
and, if it is rejected, negotiate pap; "pap/chap" indicates negotiate pap
and, if it is rejected, negotiate chap.
magic-number Controls whether the local magic number is negotiated:
enabled (negotiate), or disabled (do not negotiate)
magic-number-mismatch Indicates whether the router is configured
to ignore the LCP peer magic number and retain the PPP connection

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010 and is the answer not in the manual?

Subscribe to Our Youtube Channel

This manual is also suitable for:

Junose 11.1.x

Table of Contents