Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010 Configuration Manual page 109

Chapter 1: Configuring ATM
UNI version UNI version: 3.0, 3.1, 4.0
Maximum VCs Maximum number of virtual circuits supported on this
interface
Current VCs Current number of virtual circuits configured
ILMI VPI/VCI Number of VPI and VCI configured for ILMI (displayed only
when ILMI is configured on the interface)
VCD Number of VCD (displayed only when ILMI is configured on the
interface)
ILMI keepalive State and status of the ILMI (displayed only when ILMI is
configured on the interface)
Max VCI per VPI Maximum number of virtual circuits on each virtual path
CAC admin state Enabled, disabled
Subscription bandwidth Maximum allowable bandwidth on the port
(displayed only when CAC is enabled)
UBR weight Configured bandwidth for UBR and UBR-PCR connections
(displayed only when CAC is enabled)
Available bandwidth Bandwidth currently available on the port (displayed
only when CAC is enabled)
SNMP trap link-status Enabled, disabled
OAM cell receive status Whether the ATM interface processes or flushes
OAM cells: enabled, disabled
OAM cell filter Whether the interface flushes all OAM cells or flushes only
AIS and RDI alarm cells (displayed only when OAM cell receive status is
enabled)
atm oam loopback-location Loopback location ID for this interface
Interface Alias Text description or alias if configured for the interface
Assigned VC Class Name of the VC class assigned to this interface, if
configured
InPackets Number of packets received on this interface
InBytes Number of bytes received on this interface
InCells Number of cells received on this interface
OutPackets Number of packets transmitted on this interface
OutBytes Number of bytes transmitted on this interface
OutCells Number of cells transmitted on this interface
InErrors Number of incoming errors received on this interface
77
Monitoring ATM