Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010 Configuration Manual page 495

For e series broadband services routers - link layer configuration
Table of Contents

Advertisement

show ip mac-validate interface
ARP requests Number of ARP requests
ARP responses Number of ARP responses
Errors Total number of errors in all ARP packets
Discards Total number of discarded ARP packets
Total bridge1483 interfaces Total number of bridged Ethernet interfaces
configured on the router; this is the only information that appears when you
specify the summary keyword
Example 1 Displays full configuration and status information
host1#show bridge1483 interface
Interface
------------------------- ---------- -------------- ------- ----------
ATM 5/1.1
ATM 5/1.2
2 bridge1483 interfaces found
Example 2 Displays full status and configuration information for the specified
bridge1483 interface
host1#show bridge1483 interface atm 12/0.1
Interface
------------------------- ---------- -------------- ------- ----------
ATM 12/0.1
In: Bytes 0, Packets 0
Multicast 0, Broadcast 0
Errors 0, Discards 0
Out: Bytes 0, Packets 0
Multicast 0, Broadcast 0
Errors 0, Discards 0
ARP Statistics:
In: ARP requests 0, ARP responses 0
Errors 0, Discards 0
Out: ARP requests 0, ARP responses 0
Errors 0, Discards 0
Example 3 Displays only brief summary information
host1#show bridge1483 interface summary
Total bridge1483 interfaces: 3
See show bridge1483 interface.
Use to display the status of the MAC address validation on the physical interface.
Field descriptions
interfaceSpecifier Interface type slot/port
Keyword assigned to interface Strict or Loose
Chapter 14: Configuring Bridged Ethernet
Status
MAC Address
Up
----.----.---- Static
Up
----.----.---- Static
Status
MAC Address
Up
----.----.---- Static
Monitoring Bridged Ethernet
Oper/Admin
Type
MTU
1500/1684
8192/9188
Oper/Admin
Type
MTU
1522/1522
463

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junose 11.1.x

Table of Contents