Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010 Configuration Manual page 742

For e series broadband services routers - link layer configuration
Table of Contents

Advertisement

JUNOSe 11.1.x Link Layer Configuration Guide
show vlan profile
show vlan subinterface
710
Monitoring Dynamic Interfaces and Profiles
---------------- -------- ----- ---- --------- ------
FastEthernet 4/6 vlanOnly
FastEthernet 4/6 vlanOnly
% 2 profile override(s) found
See show vlan bulk-config.
Use to display information about the dynamic VLAN subinterfaces that have
been created with an overriding profile assignment.
Use the bulk-config keyword to display information about bulk-configured ranges.
Field descriptions
Interface Type and specifier of the VLAN subinterface
Svlan Id S-VLAN ID value, if configured
Vlan Id VLAN ID for the interface
Assigned Profile Overriding profile to be assigned to the VLAN
Status Operational status of the overriding profile assignment: Active or
Inactive. Active indicates that the router uses the overriding profile to create
dynamic interface columns because no static VLAN subinterfaces exist on
this interface. Inactive indicates that the router does not use the overriding
profile to create dynamic interface columns because a static VLAN
subinterface exists on this interface.
Example
host1#show vlan profile override
Profile override(s):
Bulk
Config Svlan Vlan Assigned
Interface
Name
---------------- ------ ----- ---- --------- ------
FastEthernet 4/6 vlanB2
% 1 profile override(s) found
See show vlan profile.
Use to display configuration and status information for a specified VLAN
subinterface or for all VLAN subinterfaces configured on the router.
Use the summary keyword to display only the counts of all VLAN subinterfaces
and VLAN major interfaces configured on the router.
Use the vlan or svlan keywords to display information about specific VLAN IDs
or S-VLAN IDs.
Use the agent-circuit-identifier keyword to display information about VLAN
subinterfaces that are created based on the agent-circuit-id information in the
2
3 ipProfile Active
2
4 ipProfile Active
Id
Id
Profile
Status
----
2 ipProfile Active

Advertisement

Table of Contents
loading

This manual is also suitable for:

Junose 11.1.x

Table of Contents