Juniper JUNOSE 11.1.X - LINK LAYER CONFIGURATION 4-7-2010 Configuration Manual page 448

JUNOSe 11.1.x Link Layer Configuration Guide
aaa tunnel calling-number-format-fallback
pppoe remote-circuit-id
416
Configuring PPPoE Remote Circuit ID Capture
host1(config)#aaa tunnel calling-number-format descriptive
include-agent-circuit-id
Example 2
host1(config)#aaa tunnel calling-number-format descriptive
include-agent-circuit-id include-agent-remote-id
Example 3
host1(config)#aaa tunnel calling-number-format include-agent-circuit-id
Use the no version to restore the default calling number format, descriptive.
See aaa tunnel calling-number-format.
Use to configure the fallback format that the E Series LAC uses to generate the
L2TP Calling Number AVP 22 in the event that the PPPoE agent ID is null or
unavailable.
The fallback format is used only when the configured calling number format
includes either or both of the agent-circuit-id and agent-remote-id.
The calling number format determines what element triggers use of the fallback
format:
Calling Number Format
agent-circuit-id
agent-circuit-id include-agent-remote-id
agent-remote-id
descriptive include-agent-circuit-id
descriptive include-agent-circuit-id
include-agent-remote-id
descriptive include-agent-remote-id
You can specify either descriptive format or fixed format.
Example
host1(config)#aaa tunnel calling-number-format-fallback fixed
Use the no version to restore the default format, descriptive.
See aaa tunnel calling-number-format-fallback.
Fallback Trigger
agent-circuit-id is empty
Both agent-circuit-id and agent-remote-id
are empty.
agent-remote-id is empty
agent-circuit-id is empty
Both agent-circuit-id and agent-remote-id
are empty.
agent-remote-id is empty