Analog Devices ADSP-SC58 Series Hardware Reference Manual page 1623

MPn Transmit Hub Port Register
The
USB_MP[n]_TXHUBPORT
mode. This register is not used in device mode. The
support SPLIT transactions. EP0 only uses the
USB_MP[n]_RXHUBPORT
Figure 27-105: USB_MP[n]_TXHUBPORT Register Diagram
Table 27-81: USB_MP[n]_TXHUBPORT Register Fields
Bit No.
(Access)
6:0 VALUE
(R/W)
ADSP-SC58x/ADSP-2158x SHARC+ Processor Hardware Reference
register specifies the hub port for full-speed and low-speed endpoints in host
USB_MP[n]_TXHUBPORT
register does not exist for EP0.)
VALUE (R/W)
Hub Port Value
Bit Name
Hub Port Value.
The USB_MP[n]_TXHUBPORT.VALUE bits hold the hub port value of the target
device for this endpoint.
USB_MP[n]_TXHUBPORT
7 6 5 4 3 2 1 0
0 0 0 0 0 0 0 0
Description/Enumeration
ADSP-SC58x USB Register Descriptions
register lets the USB controller
register. (The
27–211