Analog Devices ADSP-SC58 Series Hardware Reference Manual page 1621

MPn Transmit Function Address Register
The
USB_MP[n]_TXFUNCADDR
ter is not used in device mode. Note that the
USB_MP[n]_RXFUNCADDR
Figure 27-103: USB_MP[n]_TXFUNCADDR Register Diagram
Table 27-79: USB_MP[n]_TXFUNCADDR Register Fields
Bit No.
(Access)
6:0 VALUE
(R/W)
ADSP-SC58x/ADSP-2158x SHARC+ Processor Hardware Reference
register specifies the transmit endpoint's target address in host mode. This regis-
USB_MP[n]_TXFUNCADDR
register does not exist for EP0.)
VALUE (R/W)
Tx Function Address Value
Bit Name
Tx Function Address Value.
The USB_MP[n]_TXFUNCADDR.VALUE bits hold the address of the target device
for this endpoint.
register must be setup for EP0. (The
7 6 5 4 3 2 1 0
0 0 0 0 0 0 0 0
Description/Enumeration
ADSP-SC58x USB Register Descriptions
27–209