Root Complex Error Command Register
The
PCIE_RC_ERRCMD_[n]
tal, and Fatal error Messages than the basic Root Complex capability to generate system errors in response to error
Messages (either received or internally generated). Bit fields enable or disable generation of interrupts (claimed by
the Root Port or Root Complex Event Collector) in addition to system error Messages.
F_ERR_REP_EN (R/W)
Fatal Error Reporting Enable
NFREPEN (R/W)
Non Fatal Error Reporting Enable
Figure 29-187: PCIE_RC_ERRCMD_[n] Register Diagram
Table 29-196: PCIE_RC_ERRCMD_[n] Register Fields
Bit No.
(Access)
2
F_ERR_REP_EN
(R/W)
1
NFREPEN
(R/W)
0
CRPTEN
(R/W)
ADSP-SC58x/ADSP-2158x SHARC+ Processor Hardware Reference
register allows further control of Root Complex response to Correctable, Non-Fa-
15
14
13
12
11
10
9
0
0
0
0
0
0
0
31
30
29
28
27
26
25
0
0
0
0
0
0
0
Bit Name
Fatal Error Reporting Enable.
The PCIE_RC_ERRCMD_[n].F_ERR_REP_EN bit enables the generation of an
interrupt when a Fatal error is reported by any of the Functions in the hierarchy associ-
ated with this Root Complex Port. Root Complex Event Collectors provide support
for the above described functionality for Root Complex Integrated Endpoints.
Non Fatal Error Reporting Enable.
The PCIE_RC_ERRCMD_[n].NFREPEN bit enables the generation of an interrupt
when a Non-fatal error is reported by any of the Functions in the hierarchy associated
with this Root Complex Port. Root Complex Event Collectors provide support for the
above described functionality for Root Complex Integrated Endpoints.
Correctable Error Reporting Enable.
When Set, this bit enables the generation of an interrupt when a correctable error is
reported by any of the Functions in the hierarchy associated with this Root Complex
Port. Root Complex Event Collectors provide support for the above described func-
tionality for Root Complex Integrated Endpoints.
8
7
6
5
4
3
2
1
0
0
0
0
0
0
0
0
24
23
22
21
20
19
18
17
0
0
0
0
0
0
0
0
Description/Enumeration
ADSP-SC58x PCIE Register Descriptions
0
0
CRPTEN (R/W)
Correctable Error Reporting Enable
16
0
29–301
Need help?
Do you have a question about the ADSP-SC58 Series and is the answer not in the manual?