To Confirm Or Set The Bios Options - Keysight E5052B Service Manual

Troubleshooting
To configure the A20 Digital Motherboard and BIOS
If it is not correct, the A20 board is faulty.
Step 8. Click "OK" button to close the window.
Step 9. Turn the E5052B off before proceeding to the next step
Options".

To Confirm or Set the BIOS Options

BIOS is the PC's built-in program describing the standard procedure of basic inputs and
outputs for the system hardware. BIOS involves the system BIOS, start-up program and
BIOS setup utility. The E5052B starts up first with the BIOS when the power is turned on.
Use the following procedure to confirm or set the BIOS options, known as the BIOS setup
utility.
Run the BIOS setup utility
Use the external keyboard to select and set various options in the BIOS setup utility. Do not
operate the E5052B front panel until you exit the BIOS option setup procedure.
Procedure Step 1. Connect the external keyboard to the E5052B rear panel connector.
Step 2. Turn the instrument on.
Step 3. Press F2 key as soon as the splash screen as shown in
seconds until the message "Enter CURRENT Password:" appears.
Step 4. Press
Step 5. For unit equipped with S/N prefix MY471, enter the password "e5052" and press
For unit equipped with S/N prefix MY472, enter the password "agt0nly" and press
Then BIOS setup utility main menu is displayed as shown in
Figure 4-22 BIOS setup utility main menu
F1
ESC
e5071cse1072
82
key (The LED in the key lights.)
PhoenixBIOS Setup Utility
Main Information Configuration
System Time:
System Date:
CPU Type:
CPU Speed:
System Memory:
Extended Memory:
Help Select Item -/+
Exit Select Menu Enter
Figure 4-4
Boot Exit
Item Specific Help
[15:20:56]
[07:05:2006]
<Tab>, <Shift-Tab>, or
Intel(R)
<Enter> selects field.
1300 MHz
640 KB Date is in US format
1014 MB
ie. mm/dd/yyyy
Change values F9 Setup Dafaults
Select Sub-Manu F10 Save and Exit
"To Confirm or Set the BIOS
is displayed. Wait a few
Figure 4-22.
Chapter 4
.