System Components; Printer Overview; Access Doors And Panels - Stratasys K6 Series User Manual

3 SYSTEM COMPONENTS

This chapter describes the components of the 380mc. Information regarding the materials and tips
that can be used by the printer is also included in this chapter.

PRINTER OVERVIEW

ACCESS DOORS AND PANELS

Warning: The right and left upper and lower side panels, as well as the upper
and lower rear panels, should only be removed by an authorized service
representative. These components are indicated in the following figures for
reference purposes only.
This printer has been designed to allow easy access to the most frequently accessed areas on the system.
Doors and panels are highlighted in
Figure 3-1: Access Doors and Panels - Front View
Upper Side
Panel (left &
right)
Oven door
Lower Side
Panel (left &
right)
Canister
Bay Doors
(left & right)
Figure 3-1 and Figure 3-2.
23
Top Cover
Touchscreen
User Interface
Emergency Stop
Button
Power
Buttons:
Green - ON
Red - OFF