Step 2: Connect Dcpower; Step 3: Set Up Access To Digi Remote Manager; Step 4: Register Your Device; Step 5: Complete Setup - Digi IX20W-PR User Manual

Digi IX20 Quick Start
Step 2: Connect DC power

Step 3: Set up access to Digi Remote Manager

n If you already have a Digi Remote Manager account, skip to
n If you prefer to configure the device locally rather than using Remote Manager, see
configuration
To set up access to Remote Manager:
1. Go to shop.digi.com
You will receive an email from Remote Manager after your registration is complete.
2. Click the link in the email to go to Remote Manager and click Forgot Password to set up your
login and password.
3. Log into Remote Manager.

Step 4: Register your device

1. Register the device as instructed by the

Step 5: Complete setup

1. The device should connect within a couple of minutes.
2. If newer firmware is available, Remote Manager will prompt you to update the device. Click
Update to update the firmware. Remote Manager will perform the update in the background
and let you know when the device is up to date.
3. Click Done when the firmware update is complete.
IX20 User Guide
in the IX20 User Guide.
to create a new Remote Manager account.
Register your
Remote Manager Getting Started

Step 2: Connect DCpower

device.
Firmware
wizard.
24