Access Digi Remote Manager; Using The Web Interface - Digi IX10 User Manual

Configuration and management

Access Digi Remote Manager

To access Digi Remote Manager:
1. If you have not already done so, go to
Manager account.
Check your email for Digi Remote Manager login instructions.
2. Go to remotemanager.digi.com.
1. Enter your username and password.
The Digi Remote Manager Dashboard appears.

Using the web interface

To connect to the IX10 local WebUI:
1. Use an Ethernet cable to connect the IX10's ETH port to a laptop or PC.
2. Open a browser and go to 192.168.2.1.
The device is also accessible at the default IP address of 192.168.210.1. However, because this
IP address does not use a DHCP server, to connect to this address you must configure your
local PC with an appropriate static IP address (for example, 192.168.210.2).
3. Log into the device using a configured user name and password.
The default user name is admin and the default password is the unique password printed on
the label packaged with your device.
After logging in, the local web admin dashboard is displayed.
The dashboard shows the current state of the device.
Dashboard
area Description
Summarizes network statistics: the total number of bytes sent and received over all
Network
configured bridges and Ethernet devices.
activity
Digi Displays the device connection status for Digi Remote Manager, the amount of time
Remote the connection has been up, and the Digi Remote Manager device ID.
See
Manager
Device Displays the IX10 device's status, statistics, and identifying information.
Network
Displays the status of the network interfaces configured on the device.
Interfaces
Modems
Provides information about the signal strength and technology of the cellular modem
(s).
IX10 User Guide
Using Digi Remote Manager.
https://myaccount.digi.com/
Access Digi Remote Manager
to sign up for a Digi Remote
36