Using Digi Remote Manager; Access Digi Remote Manager; Using The Web Interface - Digi IX14 User Manual

Configuration and management

Using Digi Remote Manager

By default, your IX14 device is configured to use Digi Remote Manager as its central management
server. No configuration changes are required to begin using the Remote Manager.
For information about configuring central management for your IX14 device, see
management.

Access Digi Remote Manager

To access Digi Remote Manager:
1. If you have not already done so, go to
Remote Manager account.
Check your email for Digi Remote Manager login instructions.
2. Go to remotemanager.digi.com.
1. Enter your username and password.
The Digi Remote Manager Dashboard appears.

Using the web interface

To connect to the IX14 local WebUI:
1. Use an Ethernet cable to connect the IX14's LAN port to a laptop or PC.
2. Open a browser and go to 192.168.2.1.
3. Log into the device using a configured user name and password.
The default user name is admin and the default password is the unique password printed on
the label packaged with your device.
Note If your device was manufactured prior to firmware version 19.11.x, the default user for
logging into the device may be root, rather than admin.
The default user is root:
n
l
l
The default user is admin:
n
l
l
After logging in, the local web admin dashboard is displayed.
IX14 User Guide
If the device is at a firmware level 19.8.x or older.
If the device has been upgraded from 19.8.x or older to 19.11.x or newer.
If the device is at 19.11.x or newer when manufactured.
If the device has been upgraded from 19.8.x or older to 19.11.x or newer and has
been factory reset after the upgrade.
https://myaccount.digi.com/
Using Digi Remote Manager
Central
to sign up for a Digi
37