Step 2: Connect Dc Power; Step 3: Set Up Access To Digi Remote Manager - Digi IX20-WAG4 User Manual

Digi IX20 Quick Start
3. Use an Ethernet cable connect the IX20's WAN/ETH1 port to the internet, such as a home
internet router or LAN Ethernet port in an office environment.

Step 2: Connect DC power

Step 3: Set up access to Digi Remote Manager

If you already have a Digi Remote Manager account, skip to
n
If you prefer to configure the device locally rather than using Remote Manager, see
n
Configuration and management
To set up access to Remote Manager:
IX20 User Guide
in the IX20 User Guide.
Step 2: Connect DC power
Register your device.
27