Step 2: Connect Dc Power; Step 3: Set Up Access To Digi Remote Manager; Step 4: Register Your Device - Digi IX30 User Manual

Digi IX30 Quick start

Step 2: Connect DC power

Step 3: Set up access to Digi Remote Manager

If you already have a Digi Remote Manager account, skip to
n
If you prefer to configure the device locally rather than using Remote Manager, see
n
configuration
To set up access to Remote Manager:
1. Go to shop.digi.com
You will receive an email from Remote Manager after your registration is complete.
2. Click the link in the email to go to Remote Manager and click Forgot Password to set up your
login and password.
3. Log into Remote Manager.

Step 4: Register your device

Register the device as instructed by
IX30 User Guide
in the IX30 User Guide.
to create a new Remote Manager account.
the getting started
Step 2: Connect DC power
Register your
wizard.
device.
Firmware
21