Pg Expansion Cards; Sin/Cos Pg Card (Ec - INVT Goodrive350-19 Series Operation Manual

Goodrive350-19 series VFD for crane
Indicator Definition
Network
LED3 communication
status indicator
LED4 Power indicator
LED5 Run indicator
LED6 Error indicator
For details, see the Goodrive350-19 Series VFD Communication Expansion Card Operation Manual.
A.6 PG expansion cards
A.6.1 Sin/Cos PG card (EC-PG502)
The terminals are arranged as follows:
PE AO+
GND
Indicator definition:
Indicator Definition
Disconnection
LED1
indicator
This indicator is on when there is data exchange with the upper
computer; it blinks when there is no data exchange with the
upper computer.
This indicator is on after the control board feeds power to the
card.
This indicator is on when the card is in running state.
It is off when the card suffers a fault. Please check the
connection by resetting the pins and power supply.
It blinks at a specific interval when the card is in pre-run state.
It blinks once when the card is in the stopped state.
This indicator is on when the CAN controller bus is off or a fault
occurs on the VFD.
It is off when the card is in the working state.
It blinks at a specific interval when the address is incorrect.
It blinks once when a received frame is missed or an error occurs
during frame receiving.
BO+ ZO+
AO- BO- ZO-
This indicator is off when A1 and B1 of the encoder are disconnected; it
blinks when C1 and D1 of the encoder are disconnected; and it is on
Function
A1+ B1+ R1+
A1- B1- R1-
Function
-454-
Expansion card
C1+ C1- D1+
A2+ B2+ Z2+
A2- B2- Z2-
D1-
PWR
GND