INVT Goodrive350-19 Series Operation Manual page 458

Goodrive350-19 series VFD for crane Expansion card
lead the SMA connector of the sucker antenna into the VFD and screw it to CN2, as shown in the
following figure. Place the antenna base on the chassis and expose the upper part. Try to keep it
unblocked.
The wireless communication card must be used with the INVT VFD APP. Scan the QR code of the
VFD nameplate to download it. For details, refer to the wireless communication card manual provided
with the expansion card. The main interface is shown as follows.
-446-