INVT Goodrive350-19 Series Operation Manual page 262

Goodrive350-19 series VFD for crane
Function
Name
code
P07.01 Parameter copy
Key function
P07.02
selection
Sequence of
switching
P07.03
running-command
channels by
Description
password protection is disabled.
After the user password is set and takes effect,
you cannot enter the parameter menu if you
enter an incorrect password. Please remember
your password and save it in a secure place.
After you exit the function code editing interface,
the password protection function is enabled
within 1 minute. If password protection is
enabled, "0.0.0.0.0" is displayed when you
press the PRG/ESC key again to enter the
function code editing interface. You need to
enter the correct user password to enter the
interface.
Note: Restoring the default values may
delete the user password. Exercise caution
when using this function.
Range: 0–4
0: No operation
1: Upload parameters to the keypad
2: Download all parameters (including motor
parameters)
3: Download non-motor parameters
4: Download motor parameters
Range: 0x00–0x27
Ones place: Function of QUICK/JOG
0: No function
1: Jog
2: Reserved
3: Switch between forward and reverse rotating
4: Clear the UP/DOWN setting
5: Coast to stop
6: Switch command channels in sequence
7: Reserved
Tens place: Reserved
When P07.02=6, set the sequence of switching
running-command channels by pressing this
key.
0: Keypad→Terminal→Communication
-250-
Function parameter list
Default Modify
◎
0
◎
0x01
○
0