INVT Goodrive350-19 Series Operation Manual page 380

Goodrive350-19 series VFD for crane
Function
Name
code
Downward loose
P93.29 rope protection
mode
REV running time
of downward
P93.30
loose rope mode
2
Frequency setting
P93.31 of downward loose
rope mode 2
Description
1%–2%.
Output frequency
f
Target
frequency
P93.26
P93.28
Output
torque
P93.24
Output
torque
P93.24+2%
P93.24
Output
torque
P93.24+2%
P93.24
P93.24, P93.25 setting range: 0.0–50.0%(of the
rated torque)
P93.26 setting range:
P93.27 setting range: 0.0–50.0s
P93.28 setting range: 0.0–5.0s
P93.29 setting range: 0–1
During downward running, if the loose rope
status occurs after the loose rope detection
delay, the preset processing way is used.
0: Mode 1. The VFD reports the loose rope
protection fault (SLE) and stops.
-368-
Load held during
Loose rope
loose rope
protection
Non loose rope
protection
timeout
status
P93.27
Time t
Non loose
rope status
Load held during loose
rope protection
Loose rope protection
timeout
10.00Hz–P02.02
Function parameter list
Default Modify
◎
0
○
5.00s
○
5.00Hz