IDEC MICRO/I HG4G-CJT22 F-B Series User Manual page 5

Preface
This manual describes MICRO/I operator interfaces (HG5G/4G/3G/2G-V, HG4G/3G, HG2G-5F/-5T, HG1G/1P) and
WindO/I-NV4 general configuration software. The information includes drawing tools, setup procedures, and how to
configure all MICRO/I operator interfaces.
This manual explains the operation and handling of the MICRO/I HG5G/4G/3G/2G-V, HG4G/3G, HG2G-5F/-5T, HG1G/
1P. Please read it carefully and ensure that you fully understand the functions and performance of the MICRO/I
HG5G/4G/3G/2G-V, HG4G/3G, HG2G-5F/-5T, HG1G/1P and the WindO/I-NV4 configuration software.
Read the following materials as necessary for your particular application.
References
WindO/I-NV4 User's Manual
(This document)
WindO/I-NV4 External Device Setup
Manual (PDF)
WindO/I-NV4 Help
Character Table (PDF)
Describes the hardware specifications of the HG5G/4G/3G/2G-V, HG4G/3G,
HG2G-5F/-5T, HG1G/1P.
Describes the connection procedures and available device addresses for various
communication including the Device Link Communication, O/I Link
communication, and DM Link communication.
Describes the operating procedures. The user is allowed to view all manuals via
Help.
A list of fonts can be used with the HG5G/4G/3G/2G-V, HG4G/3G, HG2G-5F/-5T,
HG1G/1P and WindO/I-NV4. For restrictions on using the HG5G/4G/3G/2G-V,
HG4G/3G, HG2G-5F/-5T, HG1G/1P, refer to Chapter 2 "1.2 Available Text" on
page 2-6.
WindO/I-NV4 User's Manual
Content
Preface-4