Enter The Initial Partition Settings - Spectra Logic T-Series Spectra T950 Release Note

User Guide Updates — Using Partitions

Enter the Initial Partition Settings

1. From the Shared Library Services screen, select New. The Name and
2. Enter a unique, descriptive name to identify the partition in the Name
3. Select the media type for this partition. You can only use one type of
4. Select Next and select the Robotic Control Path.
5. Proceed to
96
Release Notes
Media Type screen displays.
Figure 43 The Name and Media Type screen,
create a data partition.
field. Names can be up to 32 alphanumeric characters and can include
the @ - _ /. and the space characters.
The default name for a data partition is Partition n.
media per partition.
Choose the media type to create a data partition.
Choose Cleaning to create a cleaning partition (see
Cleaning Partition on page
Note:
Only the media types corresponding to drives installed in the
library are listed on this screen. The media type you choose
dictates the type of drives that can be used in the partition.
Configure the Drives and Chambers for the
101).
Configuring a
Partition.
90940002