Connecting A Usb Storage Device; Restoring A Saved Configuration - Spectra Logic T-Series Spectra T200 Replacement Instructions Manual

Connecting a USB Storage Device

If needed, connect a USB device containing the backup configuration to the LCM.
Note:
Plug the USB storage device into the LCM before beginning a procedure
that reads or writes data to allow time for device recognition.
Figure 7 USB port location.
1. Locate the LCM.
2. Correctly orient and plug the USB storage device into the USB port on the LCM.

Restoring a Saved Configuration

Follow these steps to restore the library settings with a saved configuration.
1. Log into the library with superuser or administrator privileges.
2. Select Maintenance > Tools > Utilities. The Utilities screen displays.
3. Select Show Advanced. The Advanced Utilities Confirmation screen displays.
4. Select Next. The Utilities screen refreshes to show the advanced utilities.
5. Scroll through the list of advanced utilities and select one of the following, as
applicable for your situation:
Option
Restore Library
Configuration from
USB
Restore Library
Configuration from
Backup Configuration
a b
File
USB port
Use this option to...
Use this option to restore a configuration file previously stored
on a USB storage device.
Note:
Before starting this procedure, connect the USB device to
the LCM as described in Connecting a USB Storage Device.
Use this option to complete the restore process after using the
Upload Backup Configuration button to upload a saved
configuration file from a computer.
Note: This option is used in conjunction with
Configuration
, which must be completed first.
Restoring the Library Configuration
Upload Backup
11