Fixing Pressure Roller; Removing The Pressure Roller - Canon MF6500 Series Service Manual

Chapter 8
2) Remove the three screws [1], and then remove the reversing guide [2] and
sensor lever unit [3].
[3]
[2]
3) Remove the two pressure spring [1], and then remove the two pressure
plate [2].
[1]
[2]
[1]
See the illustration below when reinstalling the pressure springs [1] and
plates [2].
See the illustration below when reinstalling the pressure springs [1] and
plates [2].
8-6
Download Free Service Manual And Resetter Printer at http://printer1.blogspot.com
[1]
F-8-14
[1]
[2]
F-8-15
[1]
[2]
F-8-16
5) Remove the two screws [1], and then remove the grounding plate [2] and
guide [3].
[3]
6) Remove the fixing film unit [1].
[1]

8.4.3 Fixing Pressure Roller

8.4.3.1 Removing the Pressure Roller

LaserBase MF6530 / / LaserBase MF6540PL / LaserBase MF6550 / Kaser-
Base MF6560PL / / LaserBase MF6580PL
1) Remove the fixing film unit.
2) Remove the screw [1], and then slide the fixing unit inlet guide [2]
sideways to release it. (The fixing unit inlet guide need not be removed.)
3) Remove the pressure roller [3].
[3]
[1]
[2]
F-8-17
[1] [2]
F-8-18
F-8-19
[2]
[1]
F-8-20
0011-5389