Fixing Pressure Roller; Before Removing The Fixing Pressure Roller; Removing The Fixing Pressure Roller - Canon LBP3250 Series Service Manual

Chapter 3
guide [2].
[3]
[2]
2) Change the orientation of the fixing unit [1] in the direction of arrow [A],
and then in the direction of arrow [B].
[1]
3) Remove the fixing upper guide [1].
- 2 screws [2]
4) Remove the 2 pressure plates [1] at both sides (left and right).
- 2 springs [2]
- 2 pressure arms [3]
3-18
[1]
F-3-62
[A]
[B]
F-3-63
[2]
[1]
[1]
F-3-64
[1]
[3]
[2]
5) Remove the fixing film unit [1].
- Do not touch the surface [1] of the fixing film unit.
- Do not disassemble fixing film unit because it causes its functionality
failure.
[1]
[1]

3.5.3 Fixing Pressure Roller

3.5.3.1 Before Removing the Fixing Pressure Roller

1) Remove the upper cover. (page 3-2)Reference[Removing the Upper
Cover]
2) Remove the left cover. (page 3-1)Reference[Removing the Left Cover]
3) Remove the right cover. (page 3-1)Reference[Removing the Right Cov-
er]
4) Remove the rear cover. (page 3-1)Reference[Removing the Rear Cover]
5) Remove the main controller PCB. (page 3-8)Reference[Removing the
Main Controller PCB]
6) Remove the fixing unit. (page 3-16)Reference[Removing the Fixing
Unit]
7) Remove the fixing film unit. (page 3-17)Reference[Removing the Fix-
ing Film Unit]

3.5.3.2 Removing the Fixing Pressure Roller

1) Remove the fixing pressure roller [1].
- 1 washer [2]
Do not touch the surface [1] of the fixing pressure roller.
[1]
[3]
[2]
F-3-65
F-3-66
0019-8456
0019-8457