3.3
Operating Mode Descriptions
3.3.1
Mode 1
Mode 1 is the user boot mode for the flash memory. The operations are the same as that in mode 3
other than programming/erasing the flash memory.
3.3.2
Mode 2
Mode 2 is the boot mode for the flash memory. The operations are the same as that in mode 3
other than programming/erasing the flash memory.
3.3.3
Mode 3
Mode 3 is advanced mode in which the address space is 16 Mbytes, and single-chip mode with the
on-chip ROM enabled.
Section 3 MCU Operating Modes
Rev. 3.00 Mar. 14, 2006 Page 71 of 804
REJ09B0104-0300