Figure 9.25 Example Of Phase Counting Mode Setting Procedure - Renesas H8SX/1500 Series Hardware Manual

(1)
Example of Phase Counting Mode Setting Procedure
Figure 9.25 shows an example of the phase counting mode setting procedure.
Phase counting mode
Select phase counting mode
<Phase counting mode>

Figure 9.25 Example of Phase Counting Mode Setting Procedure

[1]
[2]
Start count
Section 9 16-Bit Timer Pulse Unit (TPU)
[1] Select phase counting mode with bits MD3 to
MD0 in TMDR.
[2]
Set the CST bit in TSTR to 1 to start the count
operation.
Rev. 3.00 Mar. 14, 2006 Page 319 of 804
REJ09B0104-0300