Subaru Legacy 2004 Service Manual page 3996

EXTERIOR BODY PANELS
2. TRUNK LID ARM
Install in the reverse order of removal.
Tightening torque:
Refer to "COMPONENT" of "General Descrip-
tion".
<Ref. to EB-10, TRUNK LID PANEL, COMPO-
NENT, General Description.>
3. TRUNK LID PANEL
1) Install in the reverse order of removal.
2) Install with attention to make uniform clearance
around the trunk lid panel. For the dimension of
clearance, refer to "SPECIFICATIONS" in "General
Description". <Ref. to EB-2, SPECIFICATION,
General Description.>
Tightening torque:
"
14 N m (1.43 kgf-m, 10.3 ft-lb)
Trunk Lid
EB-26