Subaru Legacy 2004 Service Manual page 3984

EXTERIOR BODY PANELS
4. FRONT HOOD STRIKER
1) Open the hood.
2) Remove the bolt, and remove the front hood
striker.
5. FRONT HOOD PANEL
1) Open the front hood to remove the window
washer hose.
2) Remove the front hood insulator.
<Ref. to EB-13, FRONT HOOD INSULATOR, RE-
MOVAL, Front Hood.>
3) Remove the front hood weather strip.
<Ref. to EB-13, FRONT HOOD WEATHER STRIP,
REMOVAL, Front Hood.>
4) Remove the front hood striker.
<Ref. to EB-14, FRONT HOOD STRIKER, RE-
MOVAL, Front Hood.>
5) Remove the front hood duct. (Turbo model)
<Ref. to EI-25, REMOVAL, Front Hood Grille.>
6) Remove the window washer hose and nozzle.
<Ref. to WW-20, REMOVAL, Front Washer Noz-
zle.>
Front Hood
7) Remove the bolts, and remove the front hood
panel from front hood hinge.
B: INSTALLATION
EB-00144
1. FRONT HOOD INSULATOR
Install in the reverse order of removal.
NOTE:
Be careful not to catch the window washer hose in.
2. FRONT HOOD WEATHER STRIP
Install in the reverse order of removal.
3. FRONT HOOD HINGE
Install in the reverse order of removal.
Tightening torque:
24.5 N
4. FRONT HOOD STRIKER
EB-00137
Install in the reverse order of removal.
Tightening torque:
33.0 N
5. FRONT HOOD PANEL
Install in the reverse order of removal.
Tightening torque:
24.5 N
C: ADJUSTMENT
1) Adjust the clearance between front hood panel
and front fender panel. Clearance must be equal at
both sides. For the dimension of clearance, refer to
"SPECIFICATIONS" in "General Description".
<Ref. to EB-2, SPECIFICATION, General Descrip-
tion.>
EB-14
"
m (2.5 kgf-m, 18.1 ft-lb)
"
m (3.4 kgf-m, 24.5 ft-lb)
"
m (2.5 kgf-m, 18.1 ft-lb)
EB-00138