Password-Control Super - 3Com 7750 Series Command Reference Manual

3Com Switch 7750 Series
Command Reference Guide – Password Control
Display the password control information of the specified user. [3Com]display
local-user user-name test
The contents of local user test:
State:
Idle-cut:
Access-limit:
Bind location:
Vlan ID:
IP address:
MAC address:
User Privilege:
Password-Aging:
Password-Length:
Password History was last reset 2 days ago.

1.1.7 password-control super

Syntax
password-control super { aging aging-time | length min-length }
undo password-control super { aging | length }
View
System view
Parameter
aging-time: Aging time for super passwords. It ranges from 1 day to 365 days and
defaults to 90 days.
min-length: Minimum length for super passwords. It ranges from 4 to 16 characters and
defaults to 10 characters.
Description
Use the password-control super command to configure the parameters related with
the supper passwords, including the password aging time and the minimum password
length.
Use the undo password-control super command to restore the default settings for
the super passwords.
The super passwords are used for the user who has logged into the device and wants
to change from a lower privilege level to a higher privilege level.
Example
# Configure the aging time of the super passwords to 10 days.
Chapter 1 Password Control Configuration Commands
Active
Disabled
Disabled
Disabled
Disabled
Disabled
Disabled
3
Enabled
Enabled
8
ServiceType Mask: T
Current AccessNum: 0
(90 days)
(10 characters)