Viewing The Detailed Contents Of A Config File - Brocade Communications Systems RFS6000 System Reference Manual

3
Viewing controller configurations
4. To permanently remove a file from the list of configurations available to the controller, select a
5. To restore the system's default configuration and revert back to factory default, click the
6. Click the Transfer Files button to move a target configuration file to a secure location for later

Viewing the detailed contents of a config file

The View screen displays the entire contents of a configuration file. Brocade recommends a file be
reviewed carefully before it is selected from the Config Files screen for edit or designation as the
controller startup configuration.
1. Select a configuration file from the Configuration screen by highlighting the file.
2. Click the View button to see the contents of the selected configuration file.
60
NOTE
Selecting either the startup-config or running-config does not enable the Edit button. A
different configuration must be available to enable the Edit function for the purposes of
replacing the existing startup-config.
configuration file from the table and click the Delete button.
If startup-config is deleted, a prompt displays stating the default controller startup-config will
automatically take its place. The controller running-config cannot be deleted.
Restore Defaults button.
NOTE
After setting the controller to revert to factory default settings, the system must be rebooted
before the default settings take effect. When this occurs, the controller IP address may
change.
use. For more information, see "Transferring a config file"
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
on page 62.
53-1001858-01