Controller Web UI Access and Image Upgrades
In this chapter
Accessing the controller Web UI
Web UI requirements
The controller Web UI is accessed using Internet Explorer version 5.5 (or later) and SUN JRE (Java
Runtime Environment) 1.5 (or later). Refer to the Sun Microsystems Web site for information on
downloading JRE.
NOTE
To successfully access the controller Web UI through a firewall, UDP port 161 must be open in order
for the controller's SNMP backend to function.
To prepare Internet Explorer to run the Web UI:
1. Open IE's Tools > Internet Options panel and select the Advanced tab.
2. Uncheck the following checkboxes:
Connecting to the controller Web UI
To display the Web UI, launch a Web browser on a computer with the capability of accessing the
controller.
NOTE
Ensure you have HTTP connectivity to the controller, as HTTP is a required to launch the controller
Web UI from a browser.
To display the controller Web UI:
Brocade Mobility RFS6000 and RFS7000 System Reference Guide
53-1001858-01
•
Accessing the controller Web UI . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
•
Controller password recovery . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
•
Upgrading the controller image . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
•
Auto installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
•
Use HTTP 1.1
•
Java console enabled (requires restart)
•
Java logging enabled
•
JIT compiler for virtual enabled (requires restart).
Chapter
2
33